Clean carpets are a cornerstone of a cozy and inviting home. If you’re tired of dingy rugs and unsightly stains, then knowing how to use Bissell Carpet Cleaner effectively is a must. Whether you’re a first-time user or need a refresher, this guide provides a step-by-step walkthrough on operating your Bissell carpet cleaner for professional-level results—without paying professional prices.
Understanding the Bissell Carpet Cleaner: What Makes It Unique
Before diving into how to use the Bissell carpet cleaner, it helps to understand what sets it apart. Bissell machines are built with innovative technologies like Heatwave Technology™, rotating DirtLifter® PowerBrushes, and dual water tanks. These features ensure deep penetration into carpet fibers and efficient removal of dirt, pet stains, and allergens.
Key Features of Bissell Carpet Cleaners
-
Dual Water Tank System: Keeps clean and dirty water separate.
-
Built-in Heaters: Maintain optimal water temperature during cleaning.
-
Multiple Brush Rows: Loosen embedded dirt for a deep clean.
-
EdgeSweep® Brushes: Clean against baseboards and furniture edges.
Knowing these features makes it easier to understand how to operate your unit effectively.
Preparing Your Carpet for Cleaning
Just like painting a wall, prep work is half the battle. Before using your Bissell carpet cleaner, you need to set the stage.
Remove Clutter and Furniture
Clear the area of any furniture, toys, and loose items. Give the carpet a good vacuuming to remove surface dirt and debris. This helps your Bissell focus on deep-cleaning rather than surface dust.
Pre-Treat Stains
Use a Bissell-approved pre-treatment spray on high-traffic areas and tough stains. Let it sit for a few minutes to break down grime and make it easier to lift during the cleaning process.
Assembling the Bissell Carpet Cleaner
Assembly might vary slightly by model, but most follow a similar pattern.
Secure the Handle and Water Tanks
Attach the upper handle to the base using the provided screws. Insert both the clean and dirty water tanks. Make sure they’re locked in place before proceeding.
Fill the Clean Water Tank
Remove the clean tank and fill it with hot (not boiling) tap water up to the fill line. Add Bissell cleaning solution according to the directions on the bottle—usually a few ounces will suffice.
Pro Tip: Never substitute with dish soap or other cleaners; it can damage your machine and void the warranty.
How to Use Bissell Carpet Cleaner: Step-by-Step Operation
Let’s get into the nuts and bolts of actually using the machine.
Start from the Farthest Corner
Always begin cleaning from the corner farthest from the room entrance. This keeps you from walking over freshly cleaned carpet.
Trigger the Spray and Push Forward
Hold the trigger to release the cleaning solution while slowly pushing the cleaner forward. This wets and agitates the carpet.
Release and Pull Back
Release the trigger and pull the machine back slowly. This extracts the dirty water and grime from the carpet. Repeat the forward-and-back motion over the same area if needed.
Note: Move at a steady pace—too fast, and you won’t clean thoroughly; too slow, and you might overwet the carpet.
Emptying and Refilling the Tanks
Keep an eye on both tanks during the process.
Refill the Clean Water Tank
If you run out of clean solution, pause and refill using the same water-to-solution ratio.
Empty the Dirty Water Tank
Once the dirty tank is full (you’ll hear a change in motor pitch), empty it into a sink or toilet. Rinse it out before reinserting.
Post-Cleaning Drying Process
After cleaning, allow the carpet to dry thoroughly to avoid mildew and odors.
Speed Up Drying
-
Open windows and doors
-
Turn on ceiling fans or use a box fan
-
Avoid walking on the carpet until it’s dry
Optional: Some Bissell models have a “Dry Only” mode that allows one more pass over the carpet to suck up remaining moisture.
Cleaning and Storing Your Bissell Carpet Cleaner
Once you’re done, it’s important to clean the unit for longevity.
Rinse the Brushes and Tanks
Detach the brushes (if removable) and rinse thoroughly. Clean out both tanks and let them air dry before reassembly.
Wipe Down the Machine
Use a damp cloth to clean the exterior. Check for trapped debris in the nozzle or brush compartment.
Store in a Cool, Dry Place
Keep the machine upright in a well-ventilated area to prevent mold and mildew buildup.
Troubleshooting Common Issues
Even the best machines run into snags. Here are common issues and how to resolve them.
| Problem | Possible Cause | Solution |
|---|---|---|
| No spray | Clogged nozzle or empty tank | Clean nozzle; refill clean water tank |
| Poor suction | Full dirty tank or blocked air path | Empty tank; check for obstructions |
| Streaks on carpet | Moving too fast or uneven spray | Slow down; ensure even spraying |
| Bad smell after cleaning | Dirty tanks or old water | Clean tanks; use fresh solution |
Tips for Maintaining Clean Carpets
Regular cleaning extends the life of your carpet and improves indoor air quality.
Stick to a Routine
-
Light traffic areas: Clean every 6-12 months
-
High traffic/pet areas: Clean every 3-6 months
Spot Clean Immediately
Address spills and stains as soon as they occur to prevent them from setting.
Use Entryway Mats
Reduce tracked-in dirt by placing mats at every entrance to your home.
FAQs
How often should I use my Bissell carpet cleaner?
Every 3–6 months for high-traffic areas or homes with pets and kids.
Can I use vinegar in my Bissell carpet cleaner?
It’s not recommended. Use only Bissell-approved solutions to protect the machine and warranty.
Do I need to vacuum before using my Bissell?
Yes, vacuuming removes loose dirt, making the carpet cleaner more effective.
How long does it take for the carpet to dry after cleaning?
Typically 4-6 hours. Increase airflow to speed up the process.
Why isn’t my Bissell spraying water?
Check for clogged nozzles or empty tanks. Reassemble everything securely.
Can I use the Bissell on upholstery?
Yes, if your model includes an upholstery tool. Always test on a hidden area first.
Leave a Reply
Want to join the discussion?Feel free to contribute!